| | 
| |
These are compact mixers with a difference. Forget the hype (a lot of semi-pro manufacturers are very good at hype!) – the MixWizards' pedigree becomes crystal clear if you actually get to listen to them alongside any other compact console. There are no gimmicks here, just rock-solid construction (the same vertical PCB structure and panel-mounted pots as our GL and ML desks) and beautifully clean audio circuit design from experienced engineers who know a thing or two about sound. Others have tried to follow where the MixWizards have led, but we’ve never been beaten yet! Digital FX can be edited using Wizard-FX Editor software - free download from www.allen-heath.com/wz162dx.asp
Mono Inputs 8 or 16 mic / line channels with 4 band EQ, HPF, phantom power, 6 auxes, on switch with led and 100mm smooth action fader. A direct out and insert using all-metal TRS jacks are provided
Dual Stereo Inputs WZ12:2DX only - 2 dual stereo input channels: A [RCA] and B [TRS] inputs have separate gain controls and on switch.
WZ 12:DX only Sources A and B can therefore be selected individually or mixed together. The channels have 4 band EQ
Stereo Mix with AB out Main output controlled by 100mm faders with 12 segment 3 colour metering with insert. A-B output for additional L&R stereo or L+R mono output selectable pre or post L&R faders. Unique underpanel mode switch to configure A-B as a local monitor output for additional stereo or mono monitoring
6 Auxiliary Sends 6 auxiliaries: 1-2 pre fade, 3-4 switchable pre/post fade and 5-6 post fade. Internal option to configure stereo channel L signal to odd auxes and R signal to even auxes. Aux masters are rotary controls with TRS outputs. The aux busses can be monitored in mono or related stereo pairs
4 Band EQ plus HPF Mono channels have separate controls for sweep and cut/boost on mid bands. HPF @ 100Hz is switchable
2 Stereo Returns [TRS] line inputs, with internal option for +4dBu, routed via level controls to L&R mix and aux 1 (plus aux 2 on ST1). Note: the internal FX return is to ST1 so that FX can be easily sent to the mix and monitors
On-board Digital FX 32 FX programs with external midi editing / control. Can be configured in single mode (16 programs fed from aux 5) or Dual mode (8 programs fed from aux 5 plus another 8 programs fed from aux 6). FX are returned via ST1 to the mix, aux 1 and aux 2. FX bybass and selection can be controlled using a footswitch. FX editor software is available from website
Engineer's Toolbox Headphone output and local monitor possible, with separate level controls. Large red led indicator when PFL on input channels is selected. PFL signal overrides the selected monitor source and L&R metering. Mono button on monitor to check phase and compatibility. A-B output can be configured as listen wedge. Global phantom power on
PSU High performance internal switched-mode power supply. Universal mains input voltage
Configuration Options Internal links to configure: Pre fade aux sends as pre EQ. Isolate pre-fade aux from channel on. Pre-fade direct out. EXT input -10dBV / +4dBu. Disable phantom power on selected channels
| |
|
| |
|
|
|
